Per­fect­ly tail­o­red and reliable

Indi­vi­du­al machi­nes for com­plex mixing tasks?
Effi­ci­ent cus­tom machi­nes from Grie­ser for your pro­duc­tion operations.

Tail­o­red to your requi­re­ments: with our broad know­ledge in spe­cial mixing and disper­si­on tech­no­lo­gy, we deve­lop tail­o­red machi­nes for your pro­duc­tion ope­ra­ti­ons so your pro­ces­ses run smoothly.

Mixers, dis­sol­vers, extru­ders or pro­ces­sing units
As job pro­duc­tion spe­cia­lists, we know what’s important in the mixing of mul­ti­ple mate­ri­als. With our many years of expe­ri­ence, we can help you opti­mi­se your pro­duc­tion and pro­ces­sing pro­ces­ses. Enqui­re direct­ly: we rea­li­se your pro­jects right from the start with a per­so­nal pro­ject mana­ger. We are the­re to assist you from the initi­al con­sul­ta­ti­on through tri­al series in our pilot plant and engi­nee­ring to pro­duc­tion. Relia­ble ser­vice of the machi­nes in your ope­ra­ti­ons is also included.

Our tail­o­red machi­nes and sys­tems are used for pro­duc­tion in a wide varie­ty of indus­tries: in indus­try for pro­du­cing adhe­si­ves and sealants, in the cos­me­tics indus­try in the pro­duc­tion of nail polish, in the che­mi­cal indus­try for pro­du­cing fer­ti­li­sers and in the food indus­try in the pro­duc­tion of por­ridge and sau­ces. Thanks to our broad know­ledge in spe­cial mixing and disper­si­on tech­no­lo­gy, you bene­fit from effi­ci­ent pro­ces­ses and relia­ble pro­duc­tion cycles.

We are acti­ve in the­se industries

Branchenicons nebeneinander

Tail­o­red ser­vices to meet your requirements

One-off pro­duc­tion in spe­cial machi­nery con­s­truc­tion – a broad field for spe­cia­li­sed appli­ca­ti­ons and count­less products.

In mul­ti­ple stages, we deve­lop a tail­o­red machi­ne for your indi­vi­du­al mixing task. In the con­cept engi­nee­ring pha­se, we work out the tech­ni­cal and eco­no­mic details of your solu­ti­on. Final­ly, we design the machi­ne accor­ding to your spe­ci­fi­ca­ti­ons in the basic engi­nee­ring pha­se. If your expec­ta­ti­ons are met, the dra­wings are sent to our in-house manu­fac­tu­ring faci­li­ty and your machi­ne is pro­du­ced with lot size one. After suc­cessful inter­nal accep­tance, we deli­ver your machi­ne to the desi­red pro­duc­tion site, in Ger­ma­ny or any­whe­re else in the world. Wet com­mis­sio­ning is car­ri­ed out the­re and then your pro­duc­tion can begin.

Deve­lo­p­ment of tail­o­red machines

We offer you machi­nes for your indi­vi­du­al mixing pro­cess that are per­fect­ly tail­o­red to your wants and needs. With inno­va­ti­ve solu­ti­ons and solid tech­ni­cal know-how, we can relia­bly manu­fac­tu­re your machine.

Ser­vice and spa­re parts

Do you pre­fer to stick with what you know? No pro­blem! With our ser­vice, we main­tain and repair your machi­nes – not just Grie­ser machi­nes, but also third-par­ty pro­ducts. By doing so, we ensu­re that your pro­duc­tion ope­ra­ti­ons can run wit­hout any downtimes.

Pilot plant trials

Do you want to test whe­ther and which of our machi­nes are sui­ta­ble for your spe­cial pro­duct? Then use our pilot plant for a tri­al! Here you can test many of our machi­ne types and mixing blades for your opti­mal pro­duc­tion process.

Sys­tem planning

One machi­ne alo­ne is not enough for you? No pro­blem! Let us help you plan the enti­re pro­duc­tion pro­cess: the com­ple­te pro­duc­tion sys­tem from fil­ling through mixing to dis­pen­sing or pack­a­ging of the final product.

Deve­lo­p­ment of tail­o­red machines

We offer you machi­nes for your indi­vi­du­al mixing pro­cess that are per­fect­ly tail­o­red to your wants and needs. With inno­va­ti­ve solu­ti­ons and solid tech­ni­cal know-how, we can relia­bly manu­fac­tu­re your machine.

Ser­vice and spa­re parts

Do you pre­fer to stick with what you know? No pro­blem! With our ser­vice, we main­tain and repair your machi­nes – not just Grie­ser machi­nes, but also third-par­ty pro­ducts. By doing so, we ensu­re that your pro­duc­tion ope­ra­ti­ons can run wit­hout any downtimes.

Pilot plant trials

Do you want to test whe­ther and which of our machi­nes are sui­ta­ble for your spe­cial pro­duct? Then use our pilot plant for a tri­al! Here you can test many of our machi­ne types and mixing blades for your opti­mal pro­duc­tion process.

Sys­tem planning

One machi­ne alo­ne is not enough for you? No pro­blem! Let us help you plan the enti­re pro­duc­tion pro­cess: the com­ple­te pro­duc­tion sys­tem from fil­ling through mixing to dis­pen­sing or pack­a­ging of the final product.

0
employees
0
deli­ver­ed machines
0
manu­fac­tu­ring buildings
0
fruit trees
0
lizards

blank

Bild aus Produktionshalle

Our cer­ti­fi­ca­ti­ons

Grieser. Your specialist for mixing technology.

GRIE­SER Maschi­nen­bau- und Ser­vice GmbH

Che­mie­stra­ße 19 – 21
68623 Lam­pert­heim
Germany

Pho­ne +49 (0) 62 06 / 94 46 0

Fax +49 (0) 62 06 / 94 46 99
Email grieser@griesermbs.com

Our dis­tri­bu­ti­on part­ner in Switzerland

SB-Pro­zess­tech­nik
Ste­fan Bücher
Zwi­schen den Bächen 2
79618 Rhein­fel­den
Ger­ma­ny
Pho­ne +49 (0) 76 23 / 46 76 86 1
Mobi­le +49 (0) 176 / 34 40 88 73
Email stefan.buecher@sb-prozesstechnik.de
www.sb-prozesstechnik.de

Let’s talk about inno­va­ti­ve mixing tech­no­lo­gy. Plea­se cont­act us if you need any infor­ma­ti­on or advice.

You can reach us by tele­pho­ne or via the cont­act form.